You say: [BTFSS register, mask] It means Bit Test File, Skip if Set The next instruction will be skipped if 'control,pin' is high. (logic 1 or set) Somewhere there is probably a list that says this about each instruction but I have yet to find it. I should set myself down and do it, but I have not given up hope of finding it. Maybe even in MicroChip's docs? Learning slowly.... John Ferrell 6241 Phillippi Rd Julian NC 27283 Phone: (336)685-9606 Dixie Competition Products NSRCA 479 AMA 4190 W8CCW "My Competition is Not My Enemy" ----- Original Message ----- From: "Tony Nixon" To: Sent: Thursday, August 30, 2001 11:42 PM Subject: Re: [pic]: quick question about BTFSS command, don't have a reference handy > rad0 wrote: > > > > hello, > > > > I don't have a book with me at the moment, and I'm not sure if this > > command is checking for a one or a zero.... > > > > BTFSS control, pin > > statment > > > > is this going to skip the next instruction if the pin is set or cleared? > > > > thanks > > > > S - means set correct, meaning 1?? > > > > if pin = 1 then skip next instruction --correct > > > It means Bit Test File, Skip if Set > > The next instruction will be skipped if 'control,pin' is high. (logic 1 > or set) > > -- > Best regards > > Tony > > mICros > http://www.bubblesoftonline.com > mailto:sales@bubblesoftonline.com > > -- > http://www.piclist.com hint: PICList Posts must start with ONE topic: > [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads > > -- http://www.piclist.com hint: The list server can filter out subtopics (like ads or off topics) for you. See http://www.piclist.com/#topics