Lawrence Lile wrote:
>DING DING DING DING DING!  A WINNER!
>
>Bob, you get the "THE BEST DESIGN HAS ZERO PARTS" award for approaching that
>lofty ideal most closely.  What a good idea!
>

Hi Lawrence, at first I thought so too, regarding Bob's solution.
However, as Harold pointed out, the leakage current out of the pin
- whether configured in analog or digital mode - is going to run into
the high source impedance and ultimately charge the cap to an incorrect
value. Bob's switching method is not going to change this.

The spec shows [digital] I/O ports have a max leakage of +/-1 uA.

1 uA * 2M --> 2v offset, cap or no cap.

High source impedance only works accurately with truly "tiny" leakage
currents.

best regards,
- dan michaels
www.oricomtech.com
========================

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.