This is okay as long as the reverse voltage isn't reached. Often this isn't
stated explicitly but is 5v for most LEDs (accourding to the tech support
bod I e-mailed when I was going to do exactly the same thing).

Ben

> QUESTION:  Since these are diodes, is it OK to have reverse current
> applied to all of them?  (With 120 LEDs [in 60 packages]:  1 will
> have forward current, 15 will be high-high, 7 will be low-low, and
> the rest [97] will be reverse biased.)
>

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body