----- Original Message -----
From: "James Fitzsimons" <jamesfit@PARADISE.NET.NZ>
To: <PICLIST@MITVMA.MIT.EDU>
Sent: Tuesday, August 21, 2001 2:34 PM
Subject: [PIC]:can't get code to work


> Hi all,
> well after getting my programmer to work I loaded the example hex file
that
> flashes an LED on port RB1 and wow! the LED flashes ! ;-)
>
> I have written a bunch of code in Hi TECH C integrated with Microchips
> MPLAB. To start of with I wrote my own version of the flashing LED program
> (attached) which flashes an LED on pin RB0. I compiled the code and loaded
> the hex file. However this time no flashing LED :-(
>
> Can anyone help me with this? Is there a bug in the code? I have gone over
> it and can't see any obvious mistakes.
>
> Is there anything special I have to do in MPLAB or HI TECH cmd line
switches
> to get code that will run?
>
> Thanks for you help
> regards
> James Fitzsimons
>


Hi James,

    I think the problem is in the delay procedure .... just try to use the
delay procedure from Hi TECH .... u can find it in the example dirctory
....it will give u accurate value for Ms,Us .... all that u need is to
include it in ur program and add it to ur project files .... just try it
plz.

Regards
Salah Mohammed

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics