I have already tested the slave boards using a switch on input and an led on
the output. Seems to work perfect. So I am 98% sure its in the MASTER or
Master Program. When the Master and Slave is hooked together and tested I
get correct signals also but the Master still does not "Pause" till   _done
signal is recieved from slave. I have never had something so simple be
sooooo hard.
Wrong Way Ray (Ray Choat)

----- Original Message -----
From: "Olin Lathrop" <olin_piclist@EMBEDINC.COM>
To: <PICLIST@MITVMA.MIT.EDU>
Sent: Monday, August 20, 2001 3:55 AM
Subject: Re: [PIC]: ===== >B to C


> > Ok I am sending an on/off signal from a 16f876  Port C.2 to a 16f877
Port
> > B.2 and my master program does not see it.
>
> Is that because it's not there or because the master has a bug?  Look at
the
> line with a scope or artificially create the signal with a switch.  This
> will at least isolate the problem to the master or the slave.  It seems
> pointless to go digging around in the code until you know which unit is
> having the problem.
>
>
> ********************************************************************
> Olin Lathrop, embedded systems consultant in Littleton Massachusetts
> (978) 742-9014, olin@embedinc.com, http://www.embedinc.com
>
> --
> http://www.piclist.com hint: PICList Posts must start with ONE topic:
> [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads
>
>
>

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads