> Ok I am sending an on/off signal from a 16f876  Port C.2 to a 16f877 Port
> B.2 and my master program does not see it.

Is that because it's not there or because the master has a bug?  Look at the
line with a scope or artificially create the signal with a switch.  This
will at least isolate the problem to the master or the slave.  It seems
pointless to go digging around in the code until you know which unit is
having the problem.


********************************************************************
Olin Lathrop, embedded systems consultant in Littleton Massachusetts
(978) 742-9014, olin@embedinc.com, http://www.embedinc.com

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads