This may be a bit ambitious but I was thinking of installing an old 75Mhz
Pentium in my car boot/trunk to use as an MP3 player. I have a Kenwood car
stereo and 10-disc changer and would like to keep the head unit to control
the PC-MP3 player. Basic functions like skip to next song, play, and maybe
even CD-Text for the song title/artist. I have the pinouts for the 10-disc
changer socket and was wondering if anyone out there could get me started in
the right direction, any help at all would be gratefull accepted.

Regards,
                Joe Denehan


   Pinouts
  /--------\
 /   9 5 1  \
|13 10 6 2 ##
|   11 7 3 ## Notch
 \  12 8 4  /
  ----------

1.  Changer On (+4V) - Out
2.  +12V - Out
3.  Ground
4.  Reset changer - Out
5.  Left channel input - In
6.  Unknown
7.  Audio Ground
8.  Mute sound - In
9.  Right channel input - In
10. I2C output data to CD changer - Out
11. I2C input data from CD-changer - In
12. Changer present - send on this pin +4V - In
13. Clock data synchronize

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu