Hi Chris,

        I don't have any code, but have you checked the EEPROM
protect bit ( Bit 8 should be 1 ) in the config word?

Heinz

At 12:39 PM -0700 8/14/01, PD wrote:
>Has anyone seen any examples that shows a routine to write multiple
>ram locations to the eeprom, it would help me greatly.
>
>Thanks for any ideas on this.
>
>Chris
>   ----- Original Message -----
>   From: PD
>   To: PICLIST@MITVMA.MIT.EDU
>   Sent: Monday, August 13, 2001 2:25 PM
>   Subject: [PIC]:trouble writing to eeprom on 16f628
>
>
>   I have followed the Microchip examples and still can't get this to
>work, I can read from the eeprom with no problems but can not get it
>to write. I created a routine to read some values from the eeprom to
>the RAM at the start of the program and then if the user changes any
>values during use they are  then written from RAM to the eeprom. If
>I simulate it in MPLAB it works fine, I can provide examples of my
>code if that helps any.
>
>   Thanks
>   Chris
>
>--
>http://www.piclist.com hint: To leave the PICList
>mailto:piclist-unsubscribe-request@mitvma.mit.edu

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu