Did you contact him?  His e-mail address is
pha@phanderson.com

Peter H Anderson, http://www.phanderson.com

--- Alaa El-agha <elagha@SYMPATICO.CA> wrote:
> Hi everyone,
>
> I am new to PIC. I have the Parallel programmer
> assembled (from P. Andesren at
> http://www.phanderson.com/PIC/picstart.html ) and
> got Bojan's P16prol for 16F84. However, I did not
> get the programmer to work.
>
> I am sure that the circuit is wired correctly, and
> the s/w settings are ok. What I noticed is the that
> D3 (pin 5) on the parallel port is always low, which
> makes the 13.4V voltage appear all the time on
> /MCLR, hence preventing correct setup.
>
> I am runing Windows98. I tried running from DOS, but
> also got he same problem.
>
> Any suggestion, help is appreciated.
>
> REgards,
> Alaa
>
> --
> http://www.piclist.com#nomail Going offline? Don't
> AutoReply us!
> email listserv@mitvma.mit.edu with SET PICList
> DIGEST in the body
>
>


__________________________________________________
Do You Yahoo!?
Make international calls for as low as $.04/minute with Yahoo! Messenger
http://phonecard.yahoo.com/

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu