This sounds like what I'm seeing with my '871 (see previous post). If
you figure it out, please let me know!

Dave Johnson

At 5:57 PM +0100 8/13/01, Alan Gorham wrote:
>Hello All
>
>I have a 16F874 and I would like to download it's target firmware
>using a PicStart Plus.
>I have read Microchip's Technical Brief TB016 on Implementing ICSP
>on 16F87X parts,
>I have been a good boy and searched the piclist archives and
>discovered that there may be
>an issue with the status of pin RB3 when programming, but otherwise
>it seems straightforward.
>
>I am using the CC5x C compiler within MPLAB and I am just
>downloading an empty main
>program in order to prove the ICSP link.
>
>The error that I am getting says that the configuration bits are not
>being set. Can anyone think
>of a reason for this or where I may be going wrong?
>
>Any suggestions greatly appreciated!
>
>Alan Gorham
>
>Embedded Systems Engineer
>Microtima Ltd
>Ouseburn Mews
>3-7 Stepney Bank
>Newcastle upon Tyne
>NE1 2PW
>
>Tel: 0191 2304411
>Fax: 0191 2304422
>
>--
>http://www.piclist.com#nomail Going offline? Don't AutoReply us!
>email listserv@mitvma.mit.edu with SET PICList DIGEST in the body

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body