Hi,
I am trying to avoid the extra chip.
ramana b v

-----Original Message-----
From: Andy Jancura [mailto:andy_jancura@HOTMAIL.COM]
Sent: Friday, August 10, 2001 12:50 PM
To: PICLIST@MITVMA.MIT.EDU
Subject: Re: [PIC]:need 4Mhz clock out of 16F628


>I have 2 devices on board
>
>Device 1 : can be fed with a crystal or external clock. Can be 2,4,8 Mhz.
>
>Device 2 (PIC) : Since I am going to use the UART fucntion I will need to
>have reasonably accurate and stable clock preferably at around 16 to 20 mhz
>mainly for good baud rate setting at a high rate.
>
>I need a way to avoid one of the crystals.
>

Take an divider and divide the clock.

Andrej

_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads