Hi Ed,


At 12:40 AM -0400 8/6/01, Ed Troy wrote:
>In an effort to try to debug the program that I am having trouble with, I
>have stripped it down to the very basic essentials.
.....<snip>....

I haven't programmed a PIC in C, so I'm probably off base but, I
don't see where the page bits are being set to access the TRIS
registers. The C compiler may handle this for you, I'm not sure.
It would certainly cause a lack of action on the board.


>void Initialize_Ports()
>         {
>                 TRISB=0x00; // set port b as outputs
>                 TRISD=0x00 ; // set port d as output
>                 TRISA=0x3F ; // set port a as inputs
>                 TRISC=0x00 ; // set port c as output
>                 PORTD=0x00 ; // initialize port D to zero
>                 PORTC=0x00 ; // initialize port C to zero
>         }
>
>
>main()
>         {
>         Initialize_Ports();
.......

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics