Scott,

 I think I could fit that into my schedule.  When do you want to
 start?  Let me know, and can begin.

                                            Regards,

                                              Jim


On Fri, 03 August 2001, Scott Beatty wrote:

>
> Jim
>
>         You would have about four months to look over the code.  I would be
> looking for any red flags or possible errors.
>
> Scott
>
> > -----Original Message-----
> > From: James Paul [SMTP:jim@JPES.COM]
> > Sent: Friday, August 03, 2001 9:57 AM
> > To:   PICLIST@MITVMA.MIT.EDU
> > Subject:      Re: [PIC]:Jet Engine FADEC
> >
> >  Scott,
> >
> >  I would be willing to lend you a hand on a time available basis.
> >  Let me know more of the specifics, and I'll give you a better
> >  estimate of my available time I can commit.
> >
> >                                                  Regards,
> >
> >                                                    Jim
> >
> >
> >
> > On Fri, 03 August 2001, Scott Beatty wrote:
> >
> > >
> > > I am re-sending this message because I did not have the proper header in
> > the
> > > subject line the first time.
> > >
> > > Hello
> > >
> > >         For the last year I have been building a jet engine and a FADEC
> > > (Full Authority Digital Electronic Controller) for it.  I have finished
> > the
> > > engine and donated it to a local university.  I am in the process of
> > > designing a new engine and have completed the design of the intake,
> > > compressor and diffuser.  The engine should have an output thrust of 300
> > to
> > > 500 lbs. with the afterburner off / on.  I used a PIC 17C766 for my
> > FADEC
> > > processor and PBP (Pic Basic Pro) to program it.  The FADEC reads 50
> > > instruments and has 20 outputs.  The instruments include thermocouples,
> > > pressure transmitters, current sensors, strain gauges, proximity
> > switches,
> > > etc. and the outputs drive pumps, valves and glow plugs.  Would anyone
> > here
> > > be interested in helping me debug the code.  The code has about 1000
> > lines
> > > of basic.  I can provide more details to those who help.
> > >
> > > Thanks
> > > Scott Beatty
> > >
> > > --
> > > http://www.piclist.com#nomail Going offline? Don't AutoReply us!
> > > email listserv@mitvma.mit.edu with SET PICList DIGEST in the body
> >
> > jim@jpes.com
> >
> > --
> > http://www.piclist.com#nomail Going offline? Don't AutoReply us!
> > email listserv@mitvma.mit.edu with SET PICList DIGEST in the body
> >
>
> --
> http://www.piclist.com#nomail Going offline? Don't AutoReply us!
> email listserv@mitvma.mit.edu with SET PICList DIGEST in the body

jim@jpes.com

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body