Scott,

 I would be willing to lend you a hand on a time available basis.
 Let me know more of the specifics, and I'll give you a better
 estimate of my available time I can commit.

                                                 Regards,

                                                   Jim



On Fri, 03 August 2001, Scott Beatty wrote:

>
> I am re-sending this message because I did not have the proper header in the
> subject line the first time.
>
> Hello
>
>         For the last year I have been building a jet engine and a FADEC
> (Full Authority Digital Electronic Controller) for it.  I have finished the
> engine and donated it to a local university.  I am in the process of
> designing a new engine and have completed the design of the intake,
> compressor and diffuser.  The engine should have an output thrust of 300 to
> 500 lbs. with the afterburner off / on.  I used a PIC 17C766 for my FADEC
> processor and PBP (Pic Basic Pro) to program it.  The FADEC reads 50
> instruments and has 20 outputs.  The instruments include thermocouples,
> pressure transmitters, current sensors, strain gauges, proximity switches,
> etc. and the outputs drive pumps, valves and glow plugs.  Would anyone here
> be interested in helping me debug the code.  The code has about 1000 lines
> of basic.  I can provide more details to those who help.
>
> Thanks
> Scott Beatty
>
> --
> http://www.piclist.com#nomail Going offline? Don't AutoReply us!
> email listserv@mitvma.mit.edu with SET PICList DIGEST in the body

jim@jpes.com

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body