This sounds very interesting.  I don't have much time to help, but if
you have specific bugs that need to be worked out I can look and see
what I see.  I've recently been following the homebrew efforts of others
who build simple jet engines out of car turbochargers.  Very interesting
stuff.



-Adam

Scott Beatty wrote:

>I am re-sending this message because I did not have the proper header in the
>subject line the first time.
>
>Hello
>
>        For the last year I have been building a jet engine and a FADEC
>(Full Authority Digital Electronic Controller) for it.  I have finished the
>engine and donated it to a local university.  I am in the process of
>designing a new engine and have completed the design of the intake,
>compressor and diffuser.  The engine should have an output thrust of 300 to
>500 lbs. with the afterburner off / on.  I used a PIC 17C766 for my FADEC
>processor and PBP (Pic Basic Pro) to program it.  The FADEC reads 50
>instruments and has 20 outputs.  The instruments include thermocouples,
>pressure transmitters, current sensors, strain gauges, proximity switches,
>etc. and the outputs drive pumps, valves and glow plugs.  Would anyone here
>be interested in helping me debug the code.  The code has about 1000 lines
>of basic.  I can provide more details to those who help.
>
>Thanks
>Scott Beatty
>
>--
>http://www.piclist.com#nomail Going offline? Don't AutoReply us!
>email listserv@mitvma.mit.edu with SET PICList DIGEST in the body
>
>
>
>
>

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body