You can download and use (for free) OrCad's eCapture schematic capture software from the SpinCircuit web site (www.spincircuit.com). The only drawback to it that I can see is that it requires an Internet link to fire it up each time (it uses a user id and password). Your client could then also doenload and install this and then they'd be able to view and print at their site. Douglas Wood Software Engineer dbwood@kc.rr.com Home of the EPICIS Development System for the PIC and SX http://epicis.piclist.com ----- Original Message ----- From: "Mike Mansheim" To: Sent: Wednesday, August 01, 2001 2:10 PM Subject: [OT]: looking for suggestions for communicating interface details > I would like to communicate some information to a vendor that is > building a test bench that will interface directly to the pic on our > product. This information will consist of, for example, pieces of a > schematic showing how our pic interfaces to a connector, how the circuit > on their side should look, the exact configuration of the interconnect > cable, square wave timing diagrams, etc., all along with text for > explaining the whole mess. As with everything, I would like to do this > rapidly! It seems it would be fastest to just write/draw it by hand, > but I would like to e-mail this information (I'm actually considering > doing it by hand and taking a picture of it). > None of the software packages we have here (Word, Excel, Visio) seem > particularly well suited to this task. I don't do the schematics around > here, but I'm also considering asking the person that does to draw this > up. Any suggestions? Would any of the schematic/cad packages that were > discussed not too long ago work very well for this? I've never used any > of them, but I could pick one up quickly. > Thanks for any input. > > -- > http://www.piclist.com hint: The list server can filter out subtopics > (like ads or off topics) for you. See http://www.piclist.com/#topics > > -- http://www.piclist.com hint: The list server can filter out subtopics (like ads or off topics) for you. See http://www.piclist.com/#topics