I wrote:
>
> In your ICD option, uncheck Enable Bebug Mode. Program as normal.
> You have to unplug the ICD module to get it to run as the module keeps
> your MCLR low.
>
> Quentin
An update. I've always unplugged my ICD for free running. But I noticed
today that I can run the PIC without the debug code and the ICD still
plugged in. After you program the PIC, reset it from MPLAB (it takes
longer to reset than with debug code) and the PIC starts running
normally. I guess the reset releases the MCLR.
Handy for that last minute testing before removing the board from ICD.

Quentin

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics