On Tue, 31 Jul 2001, Mike Kendall wrote:

> Years ago, I built a communications van and used the Brother labeling
> machine to label stuff.  I was working around the clock and didn't have much
> time to mess around.  A few months later they began curling off.  Apparantly
> the labels do not always stick all that well to metal.

Especially textured or cold metal.  The adhesive on that tape is really
not all that great, in my experience.  I've stuck innumerable yards to
Cisco, Sun, and ham radio equipment...  some sticks, some doesn't.  Your
best bet is unpainted, brush finished metal.  The more textured the paint
the quicker it will fall off.

Dale
--
A train stops at a train station.  A bus stops at a bus station.
On my desk I have a workstation...

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads