hmmmm....I tried that...but it didn't seem to work...maybe I'm doing something
wrong....but I don't think so.  I'll just work with the time delays...but thanks!

Jonathan

Spehro Pefhany wrote:

> At 09:10 PM 7/30/01 -0700, you wrote:
> >Quick question:  I am able to send two SPI bytes with no problem with a
> >short delay between the two 8-bit writes to SSPBUF, but when there is no
> >delay, it of course doesn't work.  Is there no status bit that can be
> >read to see if the byte has been sent?  I looked throught eh 16f87x
> >literature and did not seem to find an explicit answer.  or do I just
> >have to count how many clock cycles there are and delay for that period
> >of time?  (which is not difficult, but it would be nice to be able to
> >swap out various crystals and not have to deal with this)....thanks...
>
> I think you just need to check BF, as SPI transmits and receives
> simultaneously.
>
> Best regards,
> =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
> Spehro Pefhany --"it's the network..."            "The Journey is the reward"
> speff@interlog.com             Info for manufacturers: http://www.trexon.com
> Embedded software/hardware/analog  Info for designers:  http://www.speff.com
> Contributions invited->The AVR-gcc FAQ is at: http://www.bluecollarlinux.com
> =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
>
> --
> http://www.piclist.com hint: To leave the PICList
> mailto:piclist-unsubscribe-request@mitvma.mit.edu

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads