At 09:04 PM 7/30/01 -0600, you wrote:
>
>YET...when simulated, Data1 is moved to 0x020.
>It seems that no matter which page I switch to prior to executing the
movwf INDF statement, Data1 is placed into 0x020.
>Can anyone help?

RP0, RP1 only apply to direct addressing. Look at IRP (bit 7 in the STATUS
register), you'll want
to bsf STATUS, IRP  in this case to get to banks 2/3

Best regards,

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Spehro Pefhany --"it's the network..."            "The Journey is the reward"
speff@interlog.com             Info for manufacturers: http://www.trexon.com
Embedded software/hardware/analog  Info for designers:  http://www.speff.com
Contributions invited->The AVR-gcc FAQ is at: http://www.bluecollarlinux.com
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu