I am wiring an industrial trailer to contain equipment, which contains
several PICs ;-)
The raw power for the trailer is 440VAC 3 phase from shipboard
generators.  I intend to use a 440V(delta) to 208V(wye) 3 phase
transformer for isolation, to supply a little needed 3 phase power and
120V(phase voltage) for lights, computers, coffee pot etc.  One of my
biggest loads will be baseboard heating (2.5kW).
How can I wire the baseboard heat so as to maintain a balanced 3 phase
load, or is 2.5kW so small no decent generator will care?

Douglas Butler (aka Sherpa Doug)
Senior Engineer
Imetrix Inc.
1235 Route 28A
P.O. Box 152
Cataumet, MA 02534-0152
tel. (508) 564-6460
Fax (508) 564-6860
dbutler@imetrix.com

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu