Nope....  Also took all antistatic precautions.  And
the power supply I used was a 12v 500mA positive
center, it is totally compatable with the device.

--Nick


--- Olin Lathrop <olin_piclist@EMBEDINC.COM> wrote:
> > and when I power it up the microcontroller on
> > the stamp and the 5 volt regulator start burning
> up
> > (with nothing attached except the power supply and
> PC
> > serial link).
>
> Plugged in backwards possibly?
>
>
>
********************************************************************
> Olin Lathrop, embedded systems consultant in
> Littleton Massachusetts
> (978) 742-9014, olin@embedinc.com,
> http://www.embedinc.com
>
> --
> http://www.piclist.com#nomail Going offline? Don't
> AutoReply us!
> email listserv@mitvma.mit.edu with SET PICList
> DIGEST in the body
>
>


__________________________________________________
Do You Yahoo!?
Make international calls for as low as $.04/minute with Yahoo! Messenger
http://phonecard.yahoo.com/

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body