At 02:21 AM 7/30/01 +1000, you wrote:
> You mention a
>sense resistor of 1 milliohm, this is ridiculous. I have
>a good milliohm meter, and any electrical connnection will
>give you a few milliohms resistance. Your sense resistor
>will have two of these connections.

You can do Kelvin connections. I've done 15,000 ADC digital meter
systems, and you sure don't want to put more than a few tens of
micro-ohms in there. 10uOhms => 2,250 W loss. Accuracy better
than 1% (system).

Best regards,

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Spehro Pefhany --"it's the network..."            "The Journey is the reward"
speff@interlog.com             Info for manufacturers: http://www.trexon.com
Embedded software/hardware/analog  Info for designers:  http://www.speff.com
Contributions invited->The AVR-gcc FAQ is at: http://www.bluecollarlinux.com
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body