I'm using a circuit that has 2 section powered from a battery. Is it
possible to isolate the ground signal from both sections so that there is no
connection between the grounds from each parts for the circuit.

The circuits are 2 continuity circuits which detect continuity throught the
ground of the circuit but I wish to use both circuits in different sections
of the same loop but the ground from circuit 1 probe will affect the
dectection of continuity by the section 2 probe. Is there anyway around this

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body