Zantos
That is just an iritating warning to tell you that the register is in
Bank1. I would not recommend it now, as you are still learning PIC's,
but later on once you are sure you are selecting the correct banks, you
can put in:
ERRORLEVEL -302
at the top of your code to switch this message off.

Also, since you are using the .inc file, you can use:
bsf status, rp0
and
bcf status,rp0
to select and deselect Bank1.

Quentin

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics