http://www.piclist.com/techref/microchip/a2d.htm
http://www.piclist.com/techref/io/sensor/sigmdelt.htm
http://www.piclist.com/techref/microchip/math/filter.htm
http://www.piclist.com/techref/microchip/d2a.htm
http://www.piclist.com/techref/postbot.asp?by=thread&id=%5BEE%5D%3A+high+res
+DA+challenge

---
James Newton, Admin #3 mailto:jamesnewton@piclist.com
1-619-652-0593 VM 1-208-279-8767 FAX
PIC/PICList FAQ: http://www.piclist.com or .org

-----Original Message-----
From: pic microcontroller discussion list
[mailto:PICLIST@MITVMA.MIT.EDU]On Behalf Of David Stubbs
Sent: Tuesday, July 24, 2001 11:15
To: PICLIST@MITVMA.MIT.EDU
Subject: [PIC]: a2d and d2a and digital sound processing


Hi,

I'm interested in playing around with digital sound processing. Just making
simple PIC based projects like a basic amplifier. Now, I figure I need an
analogue to digital converter to feed a digital signal to the PIC to
manipulate (in the case of amplification just add double it, if I don't care
about clipping). Then a digital to analogue converter to feed the signal
back to a speaker. However, I took a look in the RS catalogues for D2A and
A2D converters and there are tons of them, all very highly priced. The
prices cannot really be that expensive can they?

I would appreciate it if someone could give me a few pointers on what
converters to use, and how to use them etc.

Thanks very much.
Regards,

David Stubbs

WEB: www.nti-uk.com
TEL UK: 07968 397782

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body