Ron:

I'll post this to both lists for continuity and then we can continue on the
TechTools list.

This is all VERY strange.  This IS how the resize works; change one column
width and they ALL change to match...same with ROWs.  Only one stretch
operation in each dimension sets the entire grid.

I think you got a bad download/install/copy or Gremlins are in your computer :)

Lets try the fresh install (perhaps even a fresh download since you had
some problems there as well.)

Jerry


At 06:07 PM 7/22/01, you wrote:
>OK Jerry, I subscribed to the other list.  I'll get on over there.  Also,
>I'll try what you suggest.  In the meantime, can you add another feature
>that will let you specify the row/colmn fix so you can resize everything at
>once, or at least don't limit the window to a maximum size, so when you try
>to oversize the window, it will just keep on stretching, or increasing the
>edge relative to the contents?  OR some other way to define the default
>row/column size so you don't have to do the whole thing manually?
>
>-----Original Message-----
>From: pic microcontroller discussion list
>[mailto:PICLIST@MITVMA.MIT.EDU]On Behalf Of Jerry Merrill
>Sent: Sunday, July 22, 2001 6:48 PM
>To: PICLIST@MITVMA.MIT.EDU
>Subject: Re: [PIC]: KNOWN BUGS WITH TDE v4.2 BETA 2 !!! Read this if you
>use that tool!
>
>
>No doubt a BETA 3 is in the future, but I'm not quite ready to accept that
>the BETA 2 is THAT confused.  We have several dozen people trying it and
>nobody else is seeing this kind of behavior.  However, I'm open to the
>possibility your work-flow has uncovered something nobody else has.
>
>Since you had some install problems and some other oddities that 'fixed
>themselves', I'm inclined to think there is something fundamentally wrong
>with the setup itself or Windows is unstable.
>
>Perhaps
>- reboot Windows (if it hasn't on its own by now :)
>- re-install the BETA 2 in a fresh directory
>- setup your project in another fresh directory
>- force a manual build (F4)
>- STEP....
>
>I've got to run, but I would like to pick this up again tomorrow.
>I'm willing to continue this exploration on the list if desired, but I
>expect we MIGHT be straying from general interest at this point.  If the
>list gets bored with this topic, we could move it to the TechTools PIC
>discussion list:
>[ mailto:piclist@tech-tools.com?subject=subscribe ]  There are probably
>more BETA testers there. Either way works for me.
>
>Jerry
>
>
>At 05:13 PM 7/22/01, you wrote:
> >Helo Jerry, more to report.  When I searched my hard drive for symbols.tde,
> >I sent every one to the recycle bin.  Then when i use the build button, TDE
> >v4.2 BETA 2 makes a new symbols.tde file that lands in the c:\TDEv42b2
> >directory.  Now the file looks normal, and when i try to emulate by
> >stepping, TDE locks up.  In fact, the TDE app loses windows "focus" and
> >the... well heck even stranger, now the Code viewing window is all "ADDLW
> >FF" even though it's now working and stepping through code.
> >
> >Well Jerry looks like the 4.2 beta needs a beta 3 after the 2.  TDE4.1 runs
> >perfectly fine, no problems anywhere -- just don't get all those new tools!
> >Darn!!!!!!!!
>
>Jerry Merrill
>
>jerrym@tech-tools.com
>http://www.tech-tools.com
>FAX: (972) 494-5814   VOICE:(972) 272-9392
>TechTools  PO Box 462101  Garland,  TX  75046-2101
>
>Join our PIC discussion list at
>http://www.tech-tools.com/picsource.htm
>
>--
>http://www.piclist.com hint: The list server can filter out subtopics
>(like ads or off topics) for you. See http://www.piclist.com/#topics
>
>--
>http://www.piclist.com hint: The list server can filter out subtopics
>(like ads or off topics) for you. See http://www.piclist.com/#topics

Jerry Merrill

jerrym@tech-tools.com
http://www.tech-tools.com
FAX: (972) 494-5814   VOICE:(972) 272-9392
TechTools  PO Box 462101  Garland,  TX  75046-2101

Join our PIC discussion list at
http://www.tech-tools.com/picsource.htm

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.