----- Original Message -----
From: "Jinx" <joecolquitt@CLEAR.NET.NZ>
To: <PICLIST@MITVMA.MIT.EDU>
Sent: Saturday, July 21, 2001 5:18 AM
Subject: Re: [EE]:Soldering piezos

<SNIP>

> Perhaps one way would be to use two steel rods with a
> bead of copper between their ends (like a spark gap)
> and zap. The tricky bit might be getting adhesion of the
> copper vapour to the ceramic. Hey, if it worked it could
> be a neat way to put your own logo onto a chip


Copper does bond to ceramic very well, just as LinTek in Australia, they use
a particle accelerator to deposit copper.

Regards,

Kat.

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu