Hi Blachetta.

I don't know any existing solutions, but if yu are going to make one i'll
give you a hint :
B&O remotes are, as far as i know, running around 100kHz and not the normal
36-38 kHz, meaning that you probably can't use a standard 3-pin
IR-demodulator module (ie. Sharp), as the bandwidth of these modules are too
narrow.

rgds
Jan

-----Original Message-----
From: Blachetta Wolfgang [mailto:Wolfgang.Blachetta@DLR.DE]
Sent: 20-jul-2001 09:30
To: PICLIST@MITVMA.MIT.EDU
Subject: [ee]: decoding Bang & Olufsen IR code with a PIC


 Hi to all,
is there anybody who has done the decoding of Bang & Olufsen IR-code
with a PIC?  In order to prevent re-enventing the weel i ask for a
existing solution. If there is no one i will try to
work on it. Everybody who would like to share the work would be welcome.

I have this Hi-Fi-System and would like to use the IR-control to switch
some different additional equipment.

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu