At 09:26 AM 7/20/01 +0200, you wrote:
>I 've got a problem:
>I've connected mi PIC16c717 to a PLL
>I am trying to make a program on the I2C bus which consists in making a
>frequency sweep.
>But the frequency ( 160MHz ) at which I want it to stop doesn't do this.
>Instead it makes the same frequency sweep over and over and never ends.
>I 've put a delay between each frequency change.
>So if anyone could give me any tip about that.

Have you put some kind of deliberate stop or loop in your program, or
is it possible it is running through all the unused memory, wrapping
the PC around and starting again?

Best regards,


=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Spehro Pefhany --"it's the network..."            "The Journey is the reward"
speff@interlog.com             Info for manufacturers: http://www.trexon.com
Embedded software/hardware/analog  Info for designers:  http://www.speff.com
Contributions invited->The AVR-gcc FAQ is at: http://www.bluecollarlinux.com
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu