Thanks for your help! but this method does not work. When you maximize MPLAB in the 1600x1200 monitor, it will only maximize on this monitor (and nothing on the other monitor) Thomas >From: Paul Hutchinson >Reply-To: pic microcontroller discussion list >To: PICLIST@MITVMA.MIT.EDU >Subject: Re: [OT] MPLAB on dual monitors? >Date: Tue, 17 Jul 2001 14:13:14 -0400 > >I don't run dual monitor so, this may not work. > >On the 800x600 monitor, size the window (in normal not maximized mode) to >just fill the screen. Close MPLAB and reopen it to make sure it remembers >the normal size you've just set. > >Now move the window over to the 1600x1200 monitor and click the maximize >button. > >Before moving the window back to the small screen or, closing MPLAB, click >the restore button so that MPLAB will re-open with a normal (not maximized) >size suitable for 800x600. > >Paul > > > > > -----Original Message----- > > From: pic microcontroller discussion list > > [mailto:PICLIST@MITVMA.MIT.EDU]On Behalf Of Thomas N > > Sent: Tuesday, July 17, 2001 1:41 PM > > To: PICLIST@MITVMA.MIT.EDU > > Subject: Re: [OT] MPLAB on dual monitors? > > > > > > I have the Sony G400, so the text is still clear at this resolution > > (1600x1200). So it seems like I have to have both monitor at the same > > resolution in order to have full screen on both monitors? Any way >around > > this problem? > > > > Thomas > >-- >http://www.piclist.com hint: The list server can filter out subtopics >(like ads or off topics) for you. See http://www.piclist.com/#topics > > _________________________________________________________________________ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. -- http://www.piclist.com hint: The list server can filter out subtopics (like ads or off topics) for you. See http://www.piclist.com/#topics