Hi Steve, thanks for the info. I chased down the
2% silver paste because Alex G said it was the
best. I got it from Farnell, about $25 US for a
25g syringe. I will try other options in the
future. :o) I trusted Alex G as I knew he was
doing some serious quantities with the SMT ovens.
-Roman


Steve Baldwin wrote:
>
> > The hardest part
> > was finding the 2% silver solder paste syringe,
> > and practicing using it.
>
> Roman,
>
> I've never used a silver solder paste to compare the two but I have
> no problems with tin/lead in a Multicore RM10 flux/medium. RM10
> is intended for use in syringes, rather than screened. You may find
> that easier and cheaper to get. I've used it with HAL, organic tin
> and immersion gold PCB finishes and all flow well and give good
> joints.

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics