Andre Abelian wrote:
>
>Hi to all,
>
>For some reason I can't send any e-mail to the list it bounces back to me
>Can any one see my e-mail?
>

This message came through just fine.

There are two commands that the listserver uses to control how your messages
are handled.

--------

The command 'set piclist repro' causes all of your messages to be sent to
you just as they are to the rest of the list. The command 'set piclist
norepro' will prevent your messages from being sent to you.

'norepro' is the default setting when you sign up. This causes people to get
confused when they don't see their own posts on the list.

-----

The command 'set piclist ack' will cause the listserver to acknowledge that
it has received and processed your message. The command 'set piclist noack'
will prevent this from happening.

'noack' is the default state. It sounds as if the 'bounces' that you are
seeing may actually be these acknowledge messages.

---------

Send the command 'set piclist noack' in the body of an email to the
LISTSERV@MITVMA.MIT.EDU listserv address (NOT to piclist@mitvma.mit.edu). If
you want to see your own posts, send the command 'set piclist repro'.

Both commands can be sent in one email but they need to be put on two
separate lines. The subject line doesn't matter, it is ignored. You should
get a response directly from the listserv address indicating your new
settings.


Regards, Bob

_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics