www.onlinemetals.com -----Original Message----- From: victor Faria [mailto:victorf@GIS.NET] Sent: Tuesday, July 10, 2001 8:31 PM To: PICLIST@MITVMA.MIT.EDU Subject: Re: [OT]: Looking for metal material suppliers for hobbist look at the mcmaster carr catalog,also msc. if all else fails go to your local welding shop. ----- Original Message ----- From: "O'Reilly John E NORC" To: Sent: Tuesday, July 10, 2001 6:57 PM Subject: Re: [OT]: Looking for metal material suppliers for hobbist > You might want to check out a hardware store. There is a chain called > Orchard Supply Hardware (OSH) that has this type of stuff. > > John > > -----Original Message----- > From: John Waters [mailto:john_fm_waters@HOTMAIL.COM] > Sent: Tuesday, July 10, 2001 3:30 PM > To: PICLIST@MITVMA.MIT.EDU > Subject: [OT]: Looking for metal material suppliers for hobbist > > > Hi All, > > I'm producing a device in small quantity (just around 10 - 20 pieces). This > device has a 3"x3" touch sensing metal plate attached to the enclosure. The > dimension, as well as the material that made up this metal plate is not > critical. As I'm not a mechanist, I have no idea where to buy the metal > plate. I want to know if there is any suppliers that will sell small > quantity of metal material or parts to home mechanist, like what digikey, > Jameco, etc., does in selling electronic components to electronic hobbist. > > Thanks in advance! > > John > > > > _________________________________________________________________________ > Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. > > -- > http://www.piclist.com hint: To leave the PICList > mailto:piclist-unsubscribe-request@mitvma.mit.edu > > -- > http://www.piclist.com hint: To leave the PICList > mailto:piclist-unsubscribe-request@mitvma.mit.edu > > -- http://www.piclist.com hint: To leave the PICList mailto:piclist-unsubscribe-request@mitvma.mit.edu -- http://www.piclist.com hint: To leave the PICList mailto:piclist-unsubscribe-request@mitvma.mit.edu