John Waters wrote:

>
>15V at "NO" current (although marked as 9V on the wallwart).
>

That's pretty typical for the unloaded output on a 9-volt wallwart.

As you increase the load, the will usually drop off fairly quickly.

Don't be surprised if the output remains above 9 volts as you crank up the
load. Many of these devices will still put out 10 or so volts even when
pretty heavily loaded. (Of course, YMMV.)

Regards, Bob

_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body