lol, just look after it.  If you have a 64k one it is more likely to get
damaged and then you have to start all over, rather than keeping a backup of
the 16k one in your bedroom draw or car ashtray.  Anyway, if you want to
bother then good for you, I just though it was a bit too much effort for a
small gain.


----- Original Message -----
From: "Angelos Gonias" <angelos.gonias@SUNDERLAND.AC.UK>
To: <PICLIST@MITVMA.MIT.EDU>
Sent: Monday, July 09, 2001 9:26 AM
Subject: Re: FUTABA CAMPAC 64K


> Agree, but how many hours will you need to get it perfect again if you
loose
> them?
> I don't know your flying skills and requirements from the radio. You can
get
> a heli to hover and fly with minimal adjustments. However it usually takes
> me least 4 hours (some at home + some at the field) before I get my heli
> ready for 3D. Also, you will never get it the same as it was before, so
you
> will still have to get used to the new setup.
>
> -Angelos
>
>
> -----Original Message-----
> From: pic microcontroller discussion list
> [mailto:PICLIST@MITVMA.MIT.EDU]On Behalf Of Justin Fielding
> Sent: 08 July 2001 23:19
> To: PICLIST@MITVMA.MIT.EDU
> Subject: Re: FUTABA CAMPAC 64K
>
>
> many more?  Heli settings?  My heli settings only use one model memory..
>
> --
> http://www.piclist.com#nomail Going offline? Don't AutoReply us!
> email listserv@mitvma.mit.edu with SET PICList DIGEST in the body
>
>
>

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body