At 03:35 PM 7/8/01 -0300, you wrote:

>        But how much does the "acreditted labs" charge for compliance
testing? :o)

I'd be really surprised if it was more than $2-$3K*. Unless your own test
equipment
is so bad or nonexistent that you send it to them with harmonics from DC to
daylight, I don't see why you'd need more than a measurement of the field
strength of
what's coming off your product. (the antenna must be tested along with the
device for
Part 15). It should be a fair bit simpler than UL or CSA on a completed
product.

* but that's also why I'm asking..

Best regards,


=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Spehro Pefhany --"it's the network..."            "The Journey is the reward"
speff@interlog.com             Info for manufacturers: http://www.trexon.com
Embedded software/hardware/analog  Info for designers:  http://www.speff.com
Contributions invited->The AVR-gcc FAQ is at: http://www.bluecollarlinux.com
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.