That's still not fixed? I ran into that about, oh 2 years ago, on a
12CE518.

        I should have the code around somewhere.        IIRC it involved
adding nops in order to meet the timing requirements. Someone else had
worked on that too, was it Dr. Imre (forgot last name)? I'd have to do some
editing, because I think i embedded the code. But I'll share. Feel free to
contact me offlist.

> -----Original Message-----
> From: Garber, Mike [mailto:mgarber@SOFTWARE.ROCKWELL.COM]
> Sent: Friday, July 06, 2001 4:38 PM
> To: PICLIST@MITVMA.MIT.EDU
> Subject: [PIC]: 12CE5xx & FL51XINC.ASM & Internal EEPROM
>
>
> This has come up before (with no real satifactory answer,
> unless I missed it).
>
> Apparently this code FL51XINC.ASM doesnt work.  And code that
> DOES work
> with a windowed part, WONT work with a OTP part.  I have no
> ICE to play with,
> and was hoping to go right from the MATLAB (ver 5.31), to a
> windowed 12CE518
> part, to a couple of OTP parts.   (Yes, I know that MATLAB
> doesnt support the
> internal EEPROM; I'll work around that).
>
> Does anybody have a "corrected" version????
>
> Also, I notice that within FL51XINC.ASM, the TRIS instruction
> is used repeatedly.
> Shouldnt a better way be to use a "shaddow" register to hold
> the value sent, so that
> the configuration of GP0 thru GP5 doesnt get screwed up from
> the direction I want
> them to be from my main program?
>
> Sorry if these turn out to be dumb questions, as this is my
> first PIC project.
>
>
> Mike Garber
>
> --
> http://www.piclist.com hint: PICList Posts must start with ONE topic:
> [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads
>
>

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads