So Neil, what type of X10 thing are you building?  Maybe a DIY ESM type
thing?

Kevin

Linux HA wrote:
>
> Barry Gershenfeld wrote:
>
> >>I would like to measure the amplitude of a signal (actually only the top
> >>half :-). Does anyone have any suggestions or pointers, I'll be using
> >>the 16F877 ICD as the proto and hope to move over to the 12C67x later.
> >>The frequency is only 120KHz.
> >>
> >
> > Well then, anytime the processor isn't busy just grab signal
> > samples off the A/D converter.  Record the highest reading you
> > get after grabbing some number of samples...that's the + amplitude,
> > assuming it was a real signal you were reading.
>
> Sometime things are just that simple, thanks!
>
> --
> Linux Home Automation           Neil Cherry             linuxha@home.com
> http://members.home.net/ncherry                         (Text only)
> http://meltingpot.fortunecity.com/lightsey/52           (Graphics)
> http://linuxha.sourceforge.net/
>                         (SourceForge)
>
> --
> http://www.piclist.com hint: PICList Posts must start with ONE topic:
> [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads