At 12:26 AM 7/4/01 -0700, you wrote:
>Hi folks,
>
>I'm sure this has come up before, but is there a way
>to store and read numerical data from the program
>memory of the 16F84? I've been working on a "Propeller
>Clock" and while there is enough memory to store
>numbers in the EEPROM I wouldn't mind being able to
>store letters for the days of the week if possible
>(without having some sort of add-on memory chip). If I
>only use half the program memory is there any way of
>storing font data in the other half during the
>programming stage (and then accessing it as my
>software is running)? I'd rather not have several
>functions a la "drawM:" "drawT:" "drawS:"...

movlw

See archives under "tables".

================================================================
Robert A. LaBudde, PhD, PAS, Dpl. ACAFS  e-mail: ral@lcfltd.com
Least Cost Formulations, Ltd.            URL: http://lcfltd.com/
824 Timberlake Drive                     Tel: 757-467-0954
Virginia Beach, VA 23464-3239            Fax: 757-467-2947

"Vere scire est per causas scire"
================================================================

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body