I am/was working on something like that but in the other direction, =
rs232 -> i2c..
never got the i2c working though
----- Original Message -----=20
From: "Dan Michaels" <oricom@USWEST.NET>
To: <PICLIST@MITVMA.MIT.EDU>
Sent: Tuesday, July 03, 2001 10:08 PM
Subject: [PIC]: [WANTED]: I2C Open-Source Tool


> [boy, I just know I'm gonna get into trouble on this one ...].
>=20
> I am in need of a very basic tool for reading I2C serial
> EEPROMs. Preferably some source code [or even hex file] I can
> simply program into an 'F84/'F877/whatever that does nothing
> more than read the stored data and send it to a host PC via
> RS232. Nothing more.
>=20
> Probably 200 lines of free, uncumbered open-source code.
> ;-)
>=20
> Basically, all I want to do is have an "independent" check
> on the algorithms that I have developed for a project. In
> and out in 30 seconds, nothing fancy.
>=20
> Anyone know where I can find this?
>=20
> best regards,
> - from dan michaels [in O-S hell]
> =
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
>=20
> --
> http://www.piclist.com hint: The PICList is archived three different
> ways.  See http://www.piclist.com/#archives for details.
>=20
>=20

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.