On Mon, 2 Jul 2001 17:59:03 +1000 Roman Black writes: > It's good enough for small production now, and > as I refine it it's getting better. I use a 19 gauge > needle on the paste syringe, ground flat and only > 10mm of needle length. I just need to practice > laying down the correct amount of paste, each run > it gets easier. Anyone having their board house silkscreen on the solder paste? I know there's an issue with the amount of time after paste placement before component placement. Can boards be refrigerated or something to extend this time? Harold FCC Rules Online at http://hallikainen.com/FccRules Lighting control for theatre and television at http://www.dovesystems.com ________________________________________________________________ GET INTERNET ACCESS FROM JUNO! Juno offers FREE or PREMIUM Internet access for less! Join Juno today! For your FREE software, visit: http://dl.www.juno.com/get/tagj. -- http://www.piclist.com hint: The PICList is archived three different ways. See http://www.piclist.com/#archives for details.