Oops, forgot the tag, resending...

Hi.

I am trying to make a PIC12C508 read in RS232 serial (only low baud
rates, say 9600) and then output clocked serial (i.e. one clock line and
one data line). I want to control an LED controller chip via my serial
port, and the controller IC takes a clocked serial input.

Basically, it's the RS232 bit I'm not sure about. Could anyone donate
some code to simply loop round reading in RS232 (directly connected to
the PIC)? I can do the output to clocked serial, although if you fancy
doing that too don't let me stop you :)

I am going to power the PIC from the serial port and use an external
crystal for the clock. I will use either a 12C508(A) or 12C509(A). The
project will eventually control some 7-segment displays on the front of
my computer.

Anyone care to help a poor lamer? :)

Regards,
Paul
--
.-------------------------------------.----------------.
| Ami3D....www.mc68k.btinternet.co.uk | Asm..C..Blitz2 |
| email...paul.qureshi@btinternet.com | Intel..Outside |
`-------------------------------------^----------------'
   Amiga Support Association - www.amigasupport.co.uk

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics