> Brent,
>
> I've lost track of where this thread started. (You may have even been the
> person who posted the original message.)
>
> At any rate:
>
> It doesn't sound like there's anything weird about your 16F84. Running the
> WDT can be expected to increase your current drain slightly. (I didn't
> recall the value either but my 16F84A data sheet lists 6uA typical, 20uA max
> for commercial parts at 4.0V Vdd)
>
> The original question related to an apparent *increase* in current when the
> WDT was *disabled* (which I don't believe has been explained yet).
>
> Bob

Hi Bob,

Yes it was my question. Just to repeat it: PIC16C84 gives an
apparent increase in current when watchdog disabled. Still haven't
found an explanation but I'm working on it.

Brent Brown
Electronic Design Solutions
16 English Street
Hamilton, New Zealand
Ph/fax: +64 7 849 0069
Mobile/text: 025 334 069
eMail:  brent.brown@clear.net.nz

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body