Hi Steve,

I just "upgraded" to Rogers@home and lost my ability to send email for the
past few days - I think I have this fixed.  If anybody is interested in
setting up a router and Ethernet hub in their home with Rogers@home in
Canada, drop me a line and I can give you some hints.

As for your programming problems, please contact me offline and let's see
what I can do to help you get going.

myke
----- Original Message -----
From: "Stephen B Webb" <sbwebb0@SAC.UKY.EDU>
To: <PICLIST@MITVMA.MIT.EDU>
Sent: Friday, June 22, 2001 12:51 AM
Subject: Re: [PIC]: 16F628 and YAPII, problems programming (again)


> > I have had good success on several projects using 16F84 and YAPII
> > programmer under linux, using gpasm.
>
> Now I get this error:
>
> > Error - Addr 0000 E 2804 A FFFE
>
> Some people suggested that maybe I had an LED, or a pullup or something
> else connected to RB5/RB6 (? or was that 6/7).
>
> I don't have anything extra connected to any of the pins, and I am able to
> program an 'F84 part just fine (I re-re-checked to make sure I still
could)
>
> I have tried to program two (2) different 16f628 parts, but with the
> same error for both.  I have tried to program in Linux (using minicom)
> and under windows (using the GUI tool provided with the YAP-II
>
> part is labelled:  PIC16F628-20/P  0117H5A
>
> Any help is appreciated.
>
> How do I interpret this error message?  Could an incorrect HEX file cause
> this sort of error?  Yes, I'm grasping at straws.
>
> -Steve
>
> --
> http://www.piclist.com hint: The list server can filter out subtopics
> (like ads or off topics) for you. See http://www.piclist.com/#topics
>
>
>

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics