Look in your header file and see what symbol the assembler expected.  It=20
might be spelled slightly differently.
If its not defined, define it yourself.

At 12:28 PM 6/7/01, you wrote:
>Hello everybody!
>
>I=B4ll tryed to set the fuses in config reg.
>on a PIC 16F870 and everything works
>good until I should set the WRT bit to off.
>Then the assembler answered me that:
>"Symbol not previously defined"
>
>Why did I get this answer?
>Please help me!!
>
>Regards
>=C5keN
>
>--
>http://www.piclist.com hint: The list server can filter out subtopics
>(like ads or off topics) for you. See http://www.piclist.com/#topics

Jerry Merrill

jerrym@tech-tools.com
http://www.tech-tools.com
FAX: (972) 494-5814   VOICE:(972) 272-9392
TechTools  PO Box 462101  Garland,  TX  75046-2101

Join our PIC discussion list at
http://www.tech-tools.com/picsource.htm

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics