that is basically what i am building myself

andy
----- Original Message -----
From: "Brent Brown" <brent.brown@CLEAR.NET.NZ>
To: <PICLIST@MITVMA.MIT.EDU>
Sent: Monday, May 28, 2001 5:36 PM
Subject: Re: [PIC]: Universal programmer


> Late entry on this thread:
>
> I've often though about a serial only in circuit universal programmer.
> Something that could be used for production as well as
> development. The hardware would be simpler than a full 48pin
> universal porgrammer. You would need only half a dozen or so lines
> like CLK,DATA_IN,DATA_OUT,RESET, /RESET,+5V, GND etc.
> The software part would probably be no less a task though. The
> physical connection could be a socket, like on the MPLAB ICD,
> connecting to custom cables for ICSP.
>
>
> Brent Brown
> Electronic Design Solutions
> 16 English Street
> Hamilton, New Zealand
> Ph/fax: +64 7 849 0069
> Mobile/text: 025 334 069
> eMail:  brent.brown@clear.net.nz
>
> --
> http://www.piclist.com hint: The list server can filter out subtopics
> (like ads or off topics) for you. See http://www.piclist.com/#topics
>
>
>

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics