Thanks Steve.

Kashif ali

"Kosmerchock, Steve" wrote:

> Kashif,
>
> The PIC16C64 DOES NOT have an A/D converter.
> The PIC16F874 has a 10-bit multi channel A/D
> on it. PORTA comes up as ANALOG inputs on power up.
> You need to initialize the correct registers to
> turn off the A/D.
>
> Load ADCON1 with the following: 0x06
>
> This will set all of PORTA to digital I/O.
>
> Best of luck!!
>
> Steve
>
> Steven Kosmerchock
> Radio Frequency Systems
> Phoenix,  Arizona  USA
> (WORK) www.rfsamericas.com
>
> www.geocities.com/researchtriangle/lab/6584
>
> "Great spirits have always encountered violent
> oppposition from mediocre minds."--A.Einstein
>
> -----Original Message-----
> From: Kashif Ali [mailto:mtl3@WOL.NET.PK]
> Sent: Friday, May 25, 2001 7:05 PM
> To: PICLIST@MITVMA.MIT.EDU
> Subject: Re: [PIC]: facing problem in 16f874
>
> Hi all,
>
> Is there any body working on 16f874.
>
> I'm facing problem to progame correctly the 16f874. I develope my
> prgrame on
> 16c64 and now I have flash 16f874. Programe working 100% ok on 16c64 but
> on
> 16f874 no respose.
>
> Please tell me what is the problem
> (Note: I am new user of pic uC.)
>
> Kashif ali
>
> --
> http://www.piclist.com#nomail Going offline? Don't AutoReply us!
> email listserv@mitvma.mit.edu with SET PICList DIGEST in the body
>
> --
> http://www.piclist.com#nomail Going offline? Don't AutoReply us!
> email listserv@mitvma.mit.edu with SET PICList DIGEST in the body

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body