look in ARRL ( american radio relay league ) or RSGB ( radio
society of great britain ) websites for info on generatinsg SSB. It
can be done with phasing or digitally with a suitable chip or with a
very sharp filter, the latter is the usual method, easiest and
cheapest in almost any occasion sfaik..hth Mike W  G8NXD

On  at , Saurabh Sinha wrote:

> Hi,
>
> Any CMOS experts that can help me with a SSB mixer. I managed to design a
> gilbert cell mixer (MOS level design) but it generates double side bands, I
> only need one of them. Filtering tends to eliminate both as the two
> frequencies are too close. Please suggest a URL or something from
> experience. I have tried to do net searches, found many hits, but none
> helpful.
>
> Thank you.
>
> Regards,
>
> S. Sinha (Saurabh)
> Tel/Fax: (012) 343-4912
> Cell: 0825405577
> E.Mail: ssinha@IEEE.ORG
> Visit: http://home.mweb.co.za/si/sinha
> ICQ: 82010326
>
> --
> http://www.piclist.com#nomail Going offline? Don't AutoReply us!
> email listserv@mitvma.mit.edu with SET PICList DIGEST in the body
>
>
>

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body