IIRC they auto detect (or can be changed with a switch on the bottom) what kind of port they are connected too (probably by using voltage levels) and adjust to match. TTYL > -----Original Message----- > From: pic microcontroller discussion list > [mailto:PICLIST@MITVMA.MIT.EDU]On Behalf Of Michael Rigby-Jones > Sent: Thursday, May 17, 2001 09:36 > To: PICLIST@MITVMA.MIT.EDU > Subject: Re: [PIC]: Simulating clicks of a mouse > > > So how come *some* PS2 mice will work on a serial port using a simple > passive adapter cable? Does these mice provide both protocols on > different > pins of the PS2 plug? > > Regards > > Mike > > > -----Original Message----- > > From: Bob Ammerman [SMTP:RAMMERMAN@PRODIGY.NET] > > Sent: Thursday, May 17, 2001 1:49 PM > > To: PICLIST@MITVMA.MIT.EDU > > Subject: Re: [PIC]: Simulating clicks of a mouse > > > > A PS/2 mouse uses TTL levels and a clocked synchronous protocol. > > > > This is _nothing_ like the RS232 protocol used by a serial MS mouse. > > > > Bob Ammerman > > RAm Systems > > (contract development of high performance, high function, low-level > > software) > > > > ----- Original Message ----- > > From: "Dale Botkin" > > To: > > Sent: Thursday, May 17, 2001 9:09 AM > > Subject: Re: [PIC]: Simulating clicks of a mouse > > > > > > > On Fri, 18 May 2001, Jinx wrote: > > > > > > > > I would like to build an interface between a mouse and a PC, using > > > > > a PIC16F84, that could "simulate" clicks of the mouse > (for an handi- > > > > > capped person) My goal is to have a box with 2 big > buttons, between > > > > > the mouse and the PC. > > > > > > > > Does this help ? It's MS though, not PS/2 > > > > > > I don't think there is a difference, other than the > connector, port and > > > IRQ used. You can get DB9 <--> mini-DIN adapters and use > either one on > > > either type of port. > > > > > > Dale > > > -- > > > A train stops at a train station. A bus stops at a bus station. > > > On my desk I have a workstation... > > > > > > -- > > > http://www.piclist.com hint: PICList Posts must start with ONE topic: > > > [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads > > > > > > > > > > -- > > http://www.piclist.com hint: PICList Posts must start with ONE topic: > > [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads > > > > > > -- > http://www.piclist.com hint: PICList Posts must start with ONE topic: > [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads > > > -- http://www.piclist.com hint: PICList Posts must start with ONE topic: [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads